Standard Smooth - HP PVC-Free Wallpaper is an ultra-smooth finish, prepasted 165gsm wallcovering with an approved fire certificate. It meets commercial wallcovering standards and has an indoor display permanence of up to 20 years. Mould and mildew resistant
Premium Smooth - Muraspec Digimura Smooth is a unique wallpaper product that has a satin non-textured finish. A paste-the-wall not the wallcovering product that is clean and simple to install and won't damage surfaces when it is removed.
Self Adhesive - FabriTac® Self Adhesive Wall Fabric - removable and repositionable! A great printable fabric surface, combined with its unique patented adhesive, makes this the ideal solution for putting large format images on walls. Anyone can easily apply, position, re-position or remove this wallpaper.
Just wanted to say thank you for getting that wallpaper through and out so fast - it's rare to get such great service so thank you - Lyndsey Markland
Preparation - Make sure that the bare wall is sound, clean and dry. Remove all loose paint, plaster or old paper and fill all holes and cracks with filler, smoothing down the surface when it is set.
"Size" The Wall - Prior to wallpapering it's a good idea to "size" the wall as this seals porous surfaces to prevent the paste from drying too fast and it also aids slip and slide when papering. Beeline Primer Sealer is a highly recommended wallpaper "size" product as it does all of the above and also helps reduce seam splits, raised edges and bubbling of wallpaper.
Start Line - Few walls are truly square or perfectly vertical. To overcome this, use a plumb line or spirit level and draw a vertical pencil line from ceiling to floor at a set distance from the left hand edge of your wall.
This start line measurement will be shown in the printed installation instructions that come with your custom printed wallpaper order.
We're very happy to answer any questions you may have about wallpaper printing and getting the very best result from your image or design.