Please enter the measurements you want for your wall mural. We recommend that you measure your wall dimensions, then add an additional 100mm to the width and height of the wall.
Example, actual wall size 3000mm x 2500mm - make your mural size 3100mm x 2600mm. This overprinting is to allow for any irregular wall dimensions, just trim off the excess when you install your mural.
How to accurately measure your wall.
We are certain that you will be completely delighted with your wallpaper mural.
If you are not satisfied with your wallpaper order we offer you the Right To Return it within 7 days of receipt and we will refund you the full purchase price.
Standard Smooth - HP PVC-Free Wallpaper is an ultra-smooth finish, prepasted 165gsm wallcovering with an approved fire certificate. It meets commercial wallcovering standards and has an indoor display permanence of up to 20 years. Mould and mildew resistant
Premium Smooth - Muraspec Digimura Smooth is a unique wallpaper product that has a satin non-textured finish. A paste-the-wall not the wallcovering product that is clean and simple to install and won't damage surfaces when it is removed.
Self Adhesive - FabriTac® Self Adhesive Wall Fabric - removable and repositionable! A great printable fabric surface, combined with its unique patented adhesive, makes this the ideal solution for putting large format images on walls. Anyone can easily apply, position, re-position or remove this wallpaper.
I am so impressed with the service at Redcliffe Imaging, my wallpaper arrived perfectly on time with great quality of print. Thank you, I will recommend you to anyone! - Laura Shelley
When you place your order we will prepare and email you a proof for you to check. This proof will be a section of your image at 100% of the desired final print size so that you can inspect the detail. Once you approve the proof your order will be printed and despatched.
We will refund the full value of your order should you decide not to proceed after checking your proof.
Use our FREE Image Report Service if you are unsure about the suitability of your image file.
Preparation - Make sure that the bare wall is sound, clean and dry. Remove all loose paint, plaster or old paper and fill all holes and cracks with filler, smoothing down the surface when it is set.
"Size" The Wall - Prior to wallpapering it's a good idea to "size" the wall as this seals porous surfaces to prevent the paste from drying too fast and it also aids slip and slide when papering. Beeline Primer Sealer is a highly recommended wallpaper "size" product as it does all of the above and also helps reduce seam splits, raised edges and bubbling of wallpaper.
Start Line - Few walls are truly square or perfectly vertical. To overcome this, use a plumb line or spirit level and draw a vertical pencil line from ceiling to floor at a set distance from the left hand edge of your wall. This start line measurement will be shown in the printed installation instructions that come with your custom printed wallpaper order.
Please Note: Your wallpaper mural is split into the minimum number of panels possible to minimise the number of joins. This means panel widths can be between 800mm to 1200mm wide, dependant on the size of the wall.
We're very happy to answer any questions you may have about wallpaper printing and getting the very best result from your image or design.